Plano XL is a rubber bitumen roof tile. The plate is reinforced with a fiberglass support layer impregnated with rubber bitumen (110-120 g/m2).

The modern rectangular bituminous shingle is twice as large as the traditional one. This roof tile is available in two different colors, Black Anthracite and gray granite.

Bitumen shingles is a high-quality roofing material that is easy to install on a hard and flat base. Perfect for renovating new buildings as well as old ruberoid and tile roofs.

The minimum slope of the roof must be at least 1:5 (11), or 20 cm of drop per 1 m.


Only Icopal bitumen or joint adhesive may be used for the installation of Icopal bituminous products. Eaves can be built in many different ways. The most beautiful and clean-looking Eaves can be built from sheet metal, which also serves as a substrate protection. The tiles of the covering material are attached to the substrate with wide-head hot-dip galvanized nails that must pass through the board (e.g. papinael 2,8 x 30 mm). If the board remains visible from below, the material can also be secured with wide-headed screws. Screws do not necessarily have to protrude through the board. An underlay must always be installed under the cover plates. If the edge of the old roof cardboard is bent down towards the eaves, the edge should be cut off and eaves sheets should be installed. If the lower Eaves boards are damaged, they must be replaced. Folds and the like in the old roof cardboard must be cut open, glued and fastened with nails.


gray granite, black Anthracite

Brand name


Bituminous shingle length (EN544)

500 mm

Bituminous shingle width (EN544)

1000 mm

Weight of bituminous shingles per m2

± 10 kg/m²

Number of bituminous shingles per pack

10 pc

Single pack coverage

2,3 m²

Number of packages

44 pc

Resistance to rupture (EN 12311-1)

≥ 100 N

Fire resistance class

Class E


10 y

Ask us offer