FOAMGLAS® T3+ SERIES 600×450 MM

The maximum compressive strength of the foamglas S3 series plate is 900 kPa and, consequently, they are mainly used as floor and roof insulation. S3 series foam glass can carry medium-sized vehicles and various maintenance machines. The thermal conductivity of the T3 + series insulation is 0.045 W / (m · K). The compressive strength requirements of any application should always be confirmed with a civil engineer to ensure the correct specification of the product.

Slabs tiles do not have a top layer of bitumen, and the material is used throughout the inner and outer railing of the building.

Tapered tiles are produced to order using original architect CAD drawings to create insulation with precise slopes and sizes for a particular building. Plates are numbered at the factory according to the installation position. An arrow minted on the top surface indicates the direction of narrowing.

Ready insulation products have a factory-installed top layer of bitumen, which allows you to install waterproofing using example a burner.

Foamglass is an insulating material made of almost 100% pure glass, which is obtained during a complex manufacturing process, forming glass frame panels of different sizes. The inside of the panel is formed by honeycombs filled with carbon dioxide (CO2) and sealed. Foam glass is commonly used in buildings where resistance to moisture is important, such as water treatment buildings, swimming pools, green roofs, etc., on high-load roofs such as parking roofs, sun roofs, machine roofs, etc., or for underground floor insulation.