SELF-ADHESIVE BITUMINOUS SHINGLES PLANO NATUR

SELF-ADHESIVE BITUMINOUS SHINGLES PLANO NATUR

Plano Natur bitumen shingle is a high-quality roofing material that is easy to install on a hard and flat base. Plano Naturit is available in 5 different colors: black, natural brown, forest green, charcoal gray and brick red. Plano Natur roofing is a versatile solution that is perfect for renovating new buildings as well as old ruberoid and tile roofs. The package contains 3 m2 of roofing.

Plano Natur is a rubber bitumen roof tile. The plate is reinforced with a fiberglass support layer impregnated with rubber bitumen (110-120 g/m2).

The product is covered with colored sprinkles. Below is the adhesive mass, which is protected by a film that is removed during installation.

The product is installed on a hard and flat substrate. Suitable for new buildings as well as renovation of old ruberoid and tile roofs.

In a pack of 3 m2 and the weight of the pack is 23 kg. The minimum slope of the roof must be at least 1:5 (11), or 20 cm of drop per 1 m.

The thickness of one plate is approx 4 mm and the weight is approx 1 kg

 

INSTALLATION INSTRUCTIONS

Only Icopal bitumen or joint adhesive may be used for the installation of Icopal bituminous products. Eaves can be built in many different ways. The most beautiful and clean-looking Eaves can be built from sheet metal, which also serves as a substrate protection. The tiles of the covering material are attached to the substrate with wide-head hot-dip galvanized nails that must pass through the board (e.g. papinael 2,8 x 30 mm). If the board remains visible from below, the material can also be secured with wide-headed screws. Screws do not necessarily have to protrude through the board. An underlay must always be installed under the cover plates. If the edge of the old roof cardboard is bent down towards the eaves, the edge should be cut off and eaves sheets should be installed. If the lower Eaves boards are damaged, they must be replaced. Folds and the like in the old roof cardboard must be cut open, glued and fastened with nails.

Color

natural brown, forest green, brick red, coal grey, black

Brand name

Icopal

Bituminous shingle length (EN544)

320 mm

Bituminous shingle width (EN544)

1000 mm

Weight of bituminous shingles per m2

± 7.67 kg/m²

Number of bituminous shingles per pack

22 pc

Single pack coverage

3 m²

Number of packages

39 pc

Resistance to rupture (EN 12311-1)

≥ 100 N

Fire resistance class

Class E

Guarantee

10 y

Ask us offer


    Contacts